Samsung Wave GT-S7230E Bada 2.0 Firmware Update Download

All Samsung Wave GT-S7230E Official Bada 2.0 Firmware Update releases download.
These are the available stock Bada 2.0 firmware that can be manually flash or installed using Odin downloader tool on Samsung Wave GT-S7230E. These firmware are useful to fix bricks if your Samsung Wave somehow stop working. This may repair or recover your device by means of re-installing its original firmware.

Europe (compatible for all European version of Samsung Wave GT-S7230E)
S7230EXXLB3 Bada 2.0 Firmware
PDA: S7230EXXLB3
CSC: S7230OXALB3
Version: Bada 2.0
Release date: February 2012
Download

S7230MXXLA1 Bada 2.0 Firmware
PDA: S7230MXXLA1
CSC: S723MOXALA1
Version: Bada 2.0
Release date: January 2012
Download

Germany

S723MXXKL7 Bada 2.0 Firmware
PDA: S723MXXKL7
CSC: S723MOXAKL7
Version: Bada 2.0
Release date: December 2011
Download

How to manually install Samsung Wave GT-S7230E Bada 2.0 Firmware
- Make sure the battery is fully charge.
- Boot your S7230E Wave 723 phone into Download Mode. Turn it off then ( Press Volume DOWN + Camera key and Power Button ).
- Run Samsung S7230E Wave 723 Downloader.
- Select BRCM2153
- In case You want to change Phone Boot too the check Full Download option.
- Press Boot button and select Boot files folder.
- Select and load these files on each designated slots: Amss, Apps, Rsrc1, Rsec2, Factory FS, CSC, ShpApp.
- Press on Port Search button to check good connection with phone.
- Click on Download button to start updating your phone.
- Do Not touch or remove cable from the phone till the operation finished.
- After it done the phone will restart by itself.
- Perform Full reset: *2767*3855# after flashing.

Read More

How to Hard Reset Samsung Galaxy S III (S3 I9300) reformat to factory default settings

This procedure will hard reset or restore back the Samsung Galaxy S3 or S III GT-I9300 to it's original factory default settings. This process is useful if you experience some lag, frozen or unresponsive issues. This is not advisable on some part, for it will wipe and delete all data stored from your Samsung Galaxy S3, so just ensure to make a back-up copy of all of the important files you had on your device.

Samsung Galaxy S3 Soft Reset and Hard Reset

If the phone freezes, the most often method is to remove the battery out after a couple of seconds and then putting it back again.

Hard Reset by Code

You can directly reset your device by typing this code *2767*3855#, this will reset your phone automatically once rebooted.

Hard Reset by button combination

Sometimes the code may not always useful specially when your Samsung Galaxy S3 is frozen and become unresponsive or in other sever unresponsive problem like it just stuck on welcome screen logo.
To fix it, just then again remove the battery out, then put it back again. Don't power it ON yet, just press and hold the Volume Up, Center button and Power button at the same time.

A menu will then appear that let choose with an option. Just use the volume button to toggle and select the wipe data/factory reset, that will then reset your Galaxy S III to it's factory default settings.

Read More

S8530XXLA1 Bada 2.0 Upgrade for Samsung Wave II S8530 newest update 2012

The new firmware with build number S8530XXLA1 (CSC: S8530OXALA1).  SamFirmware has just put online a new firmware: S8530XXLA1 (CSC S8530OXDLA1). This is officially released in Italy by Samsung Kies firmware server, an upgrade from previous firmware version S8530XXKF1. it does not only support Italian language but contains all European languages like English, German, Danish, Polski and etc. This firmware build is more stabler than the previous released. All the applications are working great. Social-hub applications, Chat On, Facebook, Dolphin browser, Allshare are working very smoothly.


Download the firmware S8530XXLA1. As always flash at your own risk!
S8530XXLA1_S8530OXALA1_ITV
The password to unzip is "samfirmware.com".

How to install and flash:  Instruction guide here. Good luck and have fun!

Read More

How to Hard Reset Samsung Galaxy Y S5360 reformat to factory default settings

Here's the procedure on how to restore back or hard reset the Samsung Galaxy Y S5360 to it's original factory default settings. This process is useful if you experience some lag, frozen, hang or unresponsive issues. This is not advisable on some part, for it will wipe and delete all data stored from your Samsung Galaxy Y, so just ensure to make a back-up copy of all of the important files you had on your device.

The most often method when the device hangs or just it frozen, is to remove the battery out after a couple of seconds and then putting it back again. To reset your device just dial this code *2767*3855#, this will reset your phone automatically once rebooted.

But sometimes the code may not always useful specially when your Samsung Galaxy Y is frozen and become unresponsive or in other sever hang problem like it just hangs on welcome screen logo. To fix it, just then again remove the battery out, then put it back again. Don't power it ON yet, just press and hold the Volume Up, Center button and Power button at the same time. A menu will then appear that let choose with an option. Just use the volume button to toggle and select the wipe data/factory reset, that will then reset your Galaxy Y to it's factory default settings.

Read More

Repair Guide: How to fix iphone 3G/3Gs backlight not working after wet damaged

This is DIY guide to fix a not working backlight on iPhone 3GS.
But proceed with precautions for this guide are meant for technicians only.
We are not responsible if anything happens to your device.

This guide will help you fix your iPhone 3G or 3Gs if it's accidentally been dropped into a water or geeting wet damaged. and then result to LCD backlight failure. There are any other solution for this but this, but this one really works and mostly a less time consuming effort.

Okay let's take a look of what happens to your iPhone, you accidenatlly drops in water or in any liquid and you turn it apart try to dry up with in few hours. And then assembled it back again and then powered it up, you can still hear some tones but it turns out a dark screen display without illuminating on the LCD. So, okay the problem might be an LCD.

Now, before you attempt to purchase a new LCD on, let's tackle up for awhile in this solution for maybe it will help you fix your iPhone's LCD backlight problem. Try this solution first before moving on finding on later solution if it doesn't help or work for you. Because if this will not work you will need to have another hard work to do, for this one is the most basic part which I did in most of my repairs before I attempt to change the LCD and so-called backlight coil replacement.

You'll only need a soldering skills in this area, you any find some tutorials in youtube etc. Basically it's a fix for the 3gs LCD, this solution shows you a detailed guide how to wire a bypass from the LCD connector.

 Download see the solution here.

Read More

Nokia C2-03 Fix Insert Sim Card Problem (SIM IC jumper Ways)

Here's the solution that may useful to fix the Nokia C2-03 if it does not detect any sim card inserted to it and it only shows "Insert SIM card" even if the sim card is already inserted.
This solution guide shows the connection of both two sim card slot of the Nokia C2-03 since it is built as a dual SIM swapping device. Thank's to GsmAngel for sharing this solution to us.

This solution covers for the side slot SIM card.

And this one covers for the SIM card beneath the battery.

You can follow the step by step troubleshooting procedure here at GsmAngel Solution.

Read More